Elevate Plastics Quality with Kawasaki Precision Gear Pumps

Kawasaki precision gear pumps deliver constant, high-pressure, positive-displacement flow tailored for demanding plastics applications. Engineers machine hardened alloy gears to sub-micron tolerances inside robust cast-iron housings. As the drive shaft spins, gear teeth trap molten polymer at the inlet and drive it through the outlet port in a steady, pulsation-free stream. That precise action ensures repeatable volumetric displacement, so injection molders and extrusion specialists hit their targets every cycle.

In injection molding, technicians dial in shot weight and cavity fill rates by adjusting pump speed. Kawasaki pumps sustain volumetric efficiency at pressures up to 5,000 psi, helping molders control melt-front velocity, reduce flow-line defects, and eliminate sink marks. When processors switch from polypropylene to glass-filled nylons, the pumps adapt instantly to viscosity shifts and temperature swings. That reliability underpins dimensional accuracy in high-precision parts such as medical device housings, optical lenses, and microfluidic components.

Extrusion lines benefit equally when Kawasaki gear pumps isolate screw speed from die pressure. Placing a pump downstream of a twin-screw extruder lets operators suppress melt surging and stabilize downstream film, sheet, or pipe production. Programmable drives let floor engineers tweak flow rates on the fly, maintaining throughput within a few percent of setpoints during long production runs. Plants see fewer temperature spikes and extended screen-pack and die life by decoupling metering from melt generation.

Filled or abrasive resins pose a serious wear challenge, but Kawasaki gears resist scoring and fatigue. Their carburized or nitrided surfaces and replaceable hardened bushings stand up to glass fibers, mineral fillers, and regrind. Thanks to a pull-apart housing design, maintenance crews swap gear sets, seals, and bearings in under an hour. That quick service cuts downtime, minimizes scrap, and boosts overall equipment effectiveness.

Process automation teams integrate Kawasaki pump drives with PLC and SCADA systems to continuously capture flow, pressure, and temperature data. Analysts mine that trace data to refine processing recipes and schedule predictive maintenance before wear impacts quality. When a pump drifts outside tolerance, software triggers alarms and auto-adjusts parameters, protecting against off-spec production and unplanned stoppages.

Plastics processors around the globe have improved part consistency, tightened tolerances, and extended equipment life by deploying Kawasaki precision gear pumps in molding and extrusion operations. They trust these pumps to uphold the exacting standards of packaging, automotive trim, medical devices, and flexible films. Kawasaki precision gear pumps stand represented in New England by Andruss Peskin Corp. (AP Corp.), providing regional application expertise, technical training, and rapid aftermarket support to keep every pump performing at peak precision and reliability.

AP Corp.
(508) 351-6200
https://a-pcorp.com

Industrial Infrared Temperature Measurement

Industrial infrared temperature measurement has revolutionized how professionals monitor heat in countless processes, from heavy manufacturing to delicate laboratory work. Optris, a global leader in this field, develops infrared thermometers, pyrometers, and thermal imaging cameras that quickly capture accurate temperature data from a safe distance. These instruments rely on the principle that every object above absolute zero emits infrared radiation. The amount and spectrum of this radiation change with temperature, allowing IR sensors to convert the captured energy into precise temperature readings.

Engineers often use the concept of blackbody radiation to explain infrared temperature measurements. Objects at different temperatures emit characteristic infrared wavelengths, and specialized detectors translate those wavelengths into voltage signals. Optris calibrates its devices using reference temperatures to ensure high accuracy and repeatability. Their IR thermometers and pyrometers focus on a specific spot and measure the IR emission from that region. At the same time, their infrared cameras gather information from a wider field of view to generate complete thermal images.

Many industries value these non-contact measurement tools because they deliver almost instantaneous feedback. Manufacturers of glass, metals, and plastics rely on Optris sensors to monitor extreme temperatures in continuous production lines. The glass industry often measures the surface temperature of molten glass and cooled products to detect anomalies and maintain product uniformity. Metal processors benefit from real-time heat monitoring during forging or heat treatment, improving product quality and conserving energy. Plastic molding requires close observation of part and mold temperatures to prevent warping and to ensure a consistent finish.

Optris cameras also help technicians spot thermal irregularities in high-density electrical systems. Overheating circuit boards or power modules are bright hotspots in a thermal image, and operators can intervene immediately to avoid failures. In 3D printing, engineers watch the temperature distribution on layers of molten material to refine the printing process and create more substantial final parts. Optris sensors also appear in fire safety applications, where early detection of elevated temperatures in waste disposal sites or bulk storage areas gives operators a head start in preventing catastrophic fires.

Infrared technology is valuable because it measures temperature without disturbing the target material. Operators minimize downtime by diagnosing issues or optimizing processes without shutting down equipment. The versatility and reliability of Optris devices reflect years of dedication to thermal measurement research and development. Industrial customers trust these products to help them reduce costs, enhance quality, and maintain safer work environments. By capturing infrared radiation from any target and converting it into accurate temperature data, Optris drives process optimization for some of the world’s most demanding applications.

AP Corp.
(508) 351-6200
https://a-pcorp.com

Andruss-Peskin Corporation: New England’s Trusted Source for Controls and Instrumentation

Andruss-Peskin Corporation (AP Corp), located in Nashua, New Hampshire, stands out as a trusted supplier of controls and instrumentation for OEM and industrial accounts across New England. The company provides high-quality products that boost process efficiency, improve safety, and maintain reliability in various manufacturing settings. Engineers and production managers rely on AP Corp’s deep technical expertise and hands-on service when they need accurate measurement and precise control solutions.

AP Corp’s product lineup begins with various sensors and transmitters. The company provides temperature, pressure, flow, level, sound, and vibration sensors that perform reliably in harsh industrial conditions. Pharmaceutical and biotech manufacturers in Massachusetts often select AP Corp because the team recommends sensors with the correct specifications and certifications. Aerospace and defense contractors in Connecticut and other advanced technology manufacturers throughout the region depend on these sensors for their accuracy and ability to integrate with complex process requirements.

Beyond sensors, AP Corp offers an extensive selection of controllers and signal conditioners. Electronics manufacturers in Connecticut partner with AP Corp for programmable controllers that integrate smoothly with existing systems. Each component performs at a high level and supports precise process tuning to maintain consistent output on the production floor. AP Corp also supplies signal conditioners that help operators manage sensor data more effectively, leading to improved control loops and better overall product consistency.

AP Corp applies its expertise to the plastics industry by supporting various molding systems and processes. The company’s understanding of temperature, pressure, and flow control in injection molding, blow molding, and extrusion lines helps plastics manufacturers achieve consistent product quality and energy efficiency. Based on hands-on field experience, AP Corp's recommendations allow customers to optimize cycle times, reduce waste, and enhance final part accuracy, ultimately delivering superior results in competitive markets.

AP Corp’s instrumentation portfolio extends to complete system solutions as well. Medical device companies in Rhode Island rely on AP Corp’s packages to meet strict regulatory standards, minimize downtime, and streamline production. Food and beverage plants in Maine work with AP Corp to implement instrument assemblies that handle rapid changes in demand, maintain reliable quality, and ensure safe operations. AP Corp’s commitment to understanding specific process conditions allows them to pinpoint suitable instrumentation solutions and guide customers through installation and startup.

By combining a diverse product offering, application know-how, and personalized service, Andruss-Peskin Corporation (AP Corp) continues supporting manufacturers' technical needs throughout New England. The company’s focus on controls and instrumentation solutions helps businesses optimize production efficiency, guarantee product integrity, and remain competitive in a fast-paced marketplace.

AP Corp.
(508) 351-6200
https://a-pcorp.com

Optris Strengthens Customer Support Through Key New England Alliance with Andruss Peskin

Optris Infrared Sensing, LLC and Andruss Peskin Corporation (AP Corp.) have partnered to enhance Optris's presence in New England. The collaboration combines Optris's advanced infrared measurement technology with AP Corp.'s established regional sales and support network.

The partnership addresses the growing demand for infrared sensors across New England's manufacturing, research, and process automation sectors. Optris provides cutting-edge infrared measurement devices that deliver precise temperature data. At the same time, AP Corp. brings deep experience in technology sales and strong relationships with local industries, from automotive and medical device manufacturers to food processing facilities.

AP Corp.'s local offices enable quick response times for product demonstrations, hands-on training, and emergency service. Their team offers practical guidance on installing, operating, and maintaining Optris products, providing customers with a single point of contact from initial inquiry through system implementation.

This strategic alliance reflects companies' commitment to customer service and technical excellence. New England businesses now have direct access to Optris's innovative infrared solutions, supported by AP Corp.'s regional expertise and industry connections. Organizations interested in optimizing their thermal imaging and temperature measurement capabilities can contact Optris Infrared Sensing, LLC, or AP Corp. for more information.

AP Corp.
(508) 351-6200
https://a-pcorp.com

Merry Christmas and Happy New Year from AP Corp.

At Andruss Peskin (AP Corp.), we want to express our heartfelt gratitude for your loyalty and trust in us throughout the year. Your continued business and partnership mean the world to us, and we are truly thankful for the opportunity to serve you. As we celebrate this holiday season, we wish you a Merry Christmas and a joyful time with your loved ones. May the New Year bring you and your family health, happiness, and success. Thank you for being an invaluable part of our journey—we look forward to another year of working together and achieving great things in 2025!

New Partnership with Andruss Peskin Corp. - B&K Precision, Industry Leader in Test and Measurement Instruments

B&K Precision, headquartered in Yorba Linda, California, has been a trusted provider of test and measurement instruments for over 70 years. The company designs reliable, accurate, easy-to-use products for engineers, technicians, and educational institutions. Their extensive product portfolio includes oscilloscopes, signal generators, power supplies, spectrum analyzers, multimeters, and electronic loads, all used across various industries, including electronics manufacturing, telecommunications, and automotive sectors.

B&K Precision’s reputation is built on a commitment to quality, innovation, and customer satisfaction. Its products are widely recognized for their precision and durability and are often used in R&D labs, production environments, and service centers around the world. The company also provides exceptional technical support and calibration services, ensuring its equipment remains reliable over time.

B&K Precision has announced that Andruss Peskin Corp. of Nashua, New Hampshire, will now represent their product line in New England. Andruss Peskin Corp., known for its deep knowledge of the test and measurement field, will be critical in expanding B&K Precision’s presence in the region. 

This partnership brings together two companies with a strong focus on customer service and technical expertise. Through Andruss Peskin’s representation, customers in New England will have easier access to B&K Precision’s high-quality instruments, which are backed by local support and personalized service. This move will enhance customer engagement and offer greater convenience for businesses and professionals seeking top-tier test and measurement solutions.

AP Corp.
(508) 351-6200
https://a-pcorp.com

Latest News and Information from Ambrell Induction Heating Solutions

The New Ambrell EKOHEAT 2

Ambrell has engineered their new EKOHEAT 2 product line to better solve process heating challenges through an innovative, industry-leading internal control and power delivery system. Building upon the evolution of their exclusive VPA Technology™, these enhancements boost process accuracy, reduce system cooling requirements, and support work with a new control panel, diagnostics, and guides.

More info here.

Check Out the Video: Why Induction Is A Green Technology

Induction heating neither consumes fossil fuels nor produces hazardous emissions or carbon dioxide (CO2). This video explains why induction heating qualifies as a green technology.

Watch the video here.

10 Advantages of Induction Heating

In the ever-changing world of manufacturing, efficiency, precision, and sustainability remain critical. As a result, induction heating continues to gain popularity throughout industry. But what exactly makes this technology so advantageous? The following article explores the top 10 reasons induction heating could benefit manufacturing processes.

Read the blog article here.

An Application Note About Shrink Fitting

This application aims to shrink fit (press fit) a steel sleeve. As a diversified equipment manufacturer, the client wants to replace an oven with induction heating. They cite reduced heating time and saved floor space as their primary reasons for making the switch.

Read the application note here.

An Application Note About Wire Coating Removal

A client, who had been using resistance heating for a copper wire coating removal application, wanted to explore whether induction could deliver faster and more consistent results. To investigate this possibility, the client sent wire samples with a polyamide coating to THE LAB at Ambrell, taking advantage of their complimentary applications testing service.

Read the application note here.

Upcoming PRO Skills Webinars

Ambrell invites visitors to explore their PRO Skills Webinar page to discover upcoming webinars. Furthermore, they offer on-demand sessions upon request at any time, including recent webinars conducted in Spanish and Italian.

View the upcoming Webinars here.

AP Corp.
(508) 351-6200
https://a-pcorp.com